Heavy Duty & Diesel Truck Forum

Heavy Duty & Diesel Truck Forum (http://www.hdtruckforum.com/index.php)
-   Ford Truck General Forum (http://www.hdtruckforum.com/forumdisplay.php?f=4)
-   -   Project 6.BLOW (http://www.hdtruckforum.com/showthread.php?t=24)

Bdons-SD 03-21-2012 01:54 AM

Pillar gauges FTW!!

06VT365 03-21-2012 08:10 AM

I love pillar gauges too, I currently have a quad pod with egt, water temp, oil temp, and fuel psi. But I could never get the water and oil temp gauges to read correctly. I have tried several different locations but just cant get it right. I was really want to check the deltas between water and oil temp to see if my oil cooler was ok or not so I finaly splurged for the insight cts.

The glowshift gauge will be good for ya, if it starts reading funky just give em a call. They have great customer service. And even if you need a new sending unit its only like $15.

I love the look of their gauges, just wish the sensors were better quality....but great customer service helps!

Agjake11 03-21-2012 10:06 AM

dont get me wrong i love my insight cts but i need a more visible boost gauge and one thats not being fooled by the computer/tune.

wanted at least fuel press and boost so i said ill get a triple at least and add HPOP

snapped a pic of the gauge mocked up in the pod. the dash holds the pod on there pretty tight and had to make sure the gauge would clear the steering wheel.

http://i615.photobucket.com/albums/t...S/9af80138.jpg

westtnfx4 03-21-2012 10:23 AM

Y U NO Have steering wheel cover :yuno:

Agjake11 03-21-2012 10:32 AM

lawl the steering wheel has been on its way out for a while now and i said F it. one of these days ill drop the money on replacing it but i tried a cover when i first got it and the generic ones at autozone etc were too small.

Agjake11 03-25-2012 02:33 PM

Installed the fuel pressure gauge Saturday morning and it was very simple actually. And thanks to ford for running wires through the firewall and leaving both ends free only have one wires passing through the firewall and easily disconnected on the other side.

Pressure never got. Below 60 psi. And I also loaded my geadhead srl+ tune that's got more boost than the srl I was running. Playing the game of how long till I can lift the heads hahaa

http://i615.photobucket.com/albums/t...S/6c353bea.jpg

06VT365 03-25-2012 02:38 PM

psi looks good. When I first put mine on last year it was 50 at idle and would drop below 40 at WOT!! So I did the blue spring upgrade and it has bee. Right at 72 at idle, and will drop to 55ish at wot running my looney tune. Seems to be a bit low still at WOT to me.

Agjake11 03-25-2012 03:56 PM

Yea this is with the blue spring installed. Haven't gone really WOT yet as its not exactly safe with this tune haha. Didn't want to lift the Rafa just yet haha. But tells me that the stock pump is good for now and I can hold off on the a1000

06VT365 03-25-2012 03:59 PM

Quote:

Originally Posted by Agjake11 (Post 2308)
Yea this is with the blue spring installed. Haven't gone really WOT yet as its not exactly safe with this tune haha. Didn't want to lift the Rafa just yet haha. But tells me that the stock pump is good for now and I can hold off on the a1000

Always nice to be able to hold of a bit longer!

Agjake11 03-25-2012 04:13 PM

You bet. Especially since we're gonna be buying a house sooner than we were expecting to but it'll be nice to have a place to keep my stuff hah


All times are GMT -4. The time now is 09:16 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.1.2 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.