Got some greasy boxes coming sometime tomorrow!
Greasy boxes are always good, it means truck parts, or pizza. I love both.
I picked up a tymar stye CAI on CL. Its made by bills custom intakes, it gained me an extra lb of boost and a little extra turbo noise ha ha. In the noise I found my turbo surge is significantly worse than I had thought. So I ordered myself an ATS turbo housing, and BD diesel billet compressor wheel. http://www.dieselpowerproducts.com/p...werstroke.aspx http://www.xtremediesel.com/atsporte...FY9eQgod5BEADA Also got some O rings to replace the upper and lower stockers, Im getting some oil leaking from somewhere hmm I wonder where ha ha. |
nice man, post some pictures up of the parts and of the work installing em. congrats on the goodies
|
Will do! Don't get a chance to post stuff for it too often. Gotta get this place off the ground ha ha.
|
i hear ya man. hopefully i'll be replacing my rear pinion seal this weekend, so i will try to post some vid/pics of that. gonna try to do it like the factory service manual says so all i have to do is pull the yoke off replace the seal and put the yoke back on without having to reshim and all..also gonna go ahead and do fuel filter and adjust valve lash
|
Nice! I'm eager to see pics!
Here's mine! Goin to tear in to her tomorrow morning with some assistance from a buddy with smaller hands ha ha. Check it out! It's purple! http://img.tapatalk.com/d/13/05/04/u4yrutar.jpg http://img.tapatalk.com/d/13/05/04/9ymegyba.jpg |
I got my ATS housing and bd diesel billet wheel finished up today! Took me a good 8 hours total with a couple trips to the auto part store for some new bolts. The clamp on the up pipe was a SOB, that took me 2 hours last night ha ha. I pulled the whole turbo and the pedestal and replaced the upper and lower o rings, they were leaking pretty bad. Cleaned up what I could/felt like ha ha, and put her all back together this morning. NO MORE SURGE!! Ha ha and a nice little whistle.
http://img.tapatalk.com/d/13/05/05/u9udyvyn.jpg http://img.tapatalk.com/d/13/05/05/ge2y6eja.jpg Look at all that extra air flow I get! http://img.tapatalk.com/d/13/05/05/urepyse2.jpg http://img.tapatalk.com/d/13/05/05/ga4yva2e.jpg http://img.tapatalk.com/d/13/05/05/y7ybu2u2.jpg http://img.tapatalk.com/d/13/05/05/5etydyde.jpg http://img.tapatalk.com/d/13/05/05/y5yzu4yn.jpg http://img.tapatalk.com/d/13/05/05/edatyba9.jpg http://img.tapatalk.com/d/13/05/05/zejysyvy.jpg |
nice man, i didn't get a chance to take pics or video while doin my pinion seql since it was ranin on amd off and i was doin it in the driveway. didn't do the valve adjustment yet thought so i should be able to video that.. here's a video of our drag car to make up for it though lol
|
Nice! You notice any difference in performance?
|
Not much of a difference as far as performance, my turbo spools up much quicker and the turbo surge is gone so I'm not losing that power anymore which I guess it technically an add in power ha ha
|
MMM...upgrade are always nice lol. That compressor wheel is awful pretty :cheers:
|
All times are GMT -4. The time now is 12:53 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimisation provided by
DragonByte SEO v1.1.2 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.