View Full Version : trany problem
deboer
08-02-2012, 10:27 PM
I just bought a 04 dodge 2500 hemi with 103k. And got exhaust put on it yesterday and went to see if it could spin um. Well it wouldn't go wouldn't go then for some reason it reved up too about 4500 rpms and after that from a stop it would go to 1700 rpms down to 1200 then I'd start to move around 1500 rpms. And it'd also have. Stall once I'm rolling and would let off to like go into the shed.
Any ideas????
tdrive0001
08-03-2012, 03:56 AM
Sounds lime converter or valve body...
deboer
08-03-2012, 06:08 AM
Are those a pretty cheap and easy fix?
Midnight Smoker
08-03-2012, 10:23 AM
Not cheap semi easy....Valvebody can be replaced by just dropping the pan, to replace the torque convertor your going to have to pull the trans...Truthfully if it were me I'd go ahead and run thru the trans and make sure your clutches and steels are still in good shape. Rather do it while it was out, then have to pull it in another couple months if something happens...
deboer
08-03-2012, 01:13 PM
Ok and im going to have my dealer do the work and probably well have then run through it just to check things over
deboer
08-04-2012, 12:51 PM
It has the po700 code which is trans control sys malfunction
deboer
08-04-2012, 08:25 PM
Drove the truck a little today. Now its also throwing codes p0734 736 871 and 841
iowaredneck
08-04-2012, 10:45 PM
yup you are screwed sorry bro, hopefully they hook you up
tdrive0001
08-04-2012, 11:48 PM
Sounds like transmission ECU is screwed...
UTAHFORD
08-05-2012, 12:07 AM
I'm with this guy ^
deboer
08-07-2012, 08:04 PM
Brought the truck down yesterday and was told today I don't have any line pressure. So i don't know what's all wrong yet but I'm guessing I need a trany.....
UTAHFORD
08-07-2012, 11:03 PM
Hmmmmm weird
deboer
08-08-2012, 05:28 AM
Guys got any thoughts ? No line pressure and Burt fluid. Won't grab untill 3 or 4 gear.
Anything left of my trany or torque converter?
Also the truck did have a rail system in it so I know the thing pulled.
deboer
08-08-2012, 07:00 PM
Well I need a trany.....so either rebuild or I trade for the same dollar I bought for
UTAHFORD
08-08-2012, 07:09 PM
Hmmmmm the dealer is gonna let you trade dollar for dollar I say do it
deboer
08-08-2012, 07:54 PM
That's what I think I'm guna do... my sales man is guna look for a 2010 or newer powerwagon and price me a new one
UTAHFORD
08-08-2012, 08:51 PM
Sweet man that'll be sweet
iowaredneck
08-08-2012, 09:17 PM
serves you right goober for being a d bag to me and not returning my text messages. besides too many people warned you not to buy a gasser dodge, the gassers all burn through tranny's like it's going out of style. just like your old man style.
tdrive0001
08-09-2012, 02:12 AM
Ok fellas... lets try and keep the personal issues else where... this forum is for networking and sharing the passion of HD trucks. I'm gonna bet the admins agree with me...
UTAHFORD
08-09-2012, 02:55 PM
Ok fellas... lets try and keep the personal issues else where... this forum is for networking and sharing the passion of HD trucks. I'm gonna bet the admins agree with me...
I agree its done guys remember if ya cant say anything nice then don't say anything all or keep it personal I don't care just not fins have a weeper ordeal over here
iowaredneck
08-09-2012, 03:13 PM
it's done now on my end
Darth Bama
08-09-2012, 03:14 PM
:mfr_closed1:
yz85rider2002
08-12-2012, 10:58 PM
Sucks to hear bout the truck
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.